FAQ:

• Zithini iindleko zokulungisa umatshini ngamnye wegesi?

Iintlobo ezahlukeneyo zinezixhobo ezahlukeneyo kunye neendleko zokugcinwa kwazo. Kuhlobo olufanayo, ubungakanani kunye nokusebenza kwazo kwahlukile.
Ngokomzekelo, masithi iijenereyitha ze-oksijini ze-PSA, iindawo zokugcina izinto ziquka ii-air compressors, izihluzi, kunye nee-oxygen compressors ukuba zikhona.

• Kuza kwenzeka ntoni ukuba ukulungiswa akwenziwanga kakuhle?

Okokuqala, ukuba amanzi amaninzi, umphunga weoyile, uthuli lungena kwiindawo ezithile ezifunxayo njengesihluzo semolekyuli, ezi ndawo kuya kufuneka zitshintshwe ngokupheleleyo. Emva koko oku kuya kuchaphazela ukusebenza koomatshini.
Ngoko ke ukugcinwa rhoqo ngumsebenzi obalulekileyo ekufuneka wenziwe, njengokutshintsha izinto zesihluzo rhoqo emva kweeyure ezingama-2,000 ukuya kwezingama-4,000.

• Yeyiphi indlela kunye nohlobo lwendlela olungabizi kakhulu?

Kuxhomekeke ekubeni ingakanani igesi efunekayo kunye neemfuno zayo zomgangatho. Iintlobo ezahlukeneyo zinezibonelelo zazo.

• Zithini iimfuno zezixhobo zokusebenza zenkqubo?

Ngokubanzi amandla ombane ayafuneka kwinkqubo nganye, kwaye ezinye zifuna namanzi okupholisa. Ukusetyenziswa kwamandla kuyahluka ukusuka kobukhulu obuncinci ukuya kobukhulu. Kwiyunithi yombane esetyenziswa kakhulu, ngesiqhelo ukusetyenziswa kwamandla kweyunithi kuncinci.

• Luluphi uxinzelelo olukhutshwayo olunokuveliswa sisityalo segesi?

Uhlobo olwahlukileyo luneengcinezelo ezahlukeneyo eziqhelekileyo ukusuka kwi-0.5 ukuya kwi-20bar. Xa kongezwe i-compressor, kukho naziphi na iingcinezelo ezifunekayo.
Umzekelo, ijenereyitha ye-nitrogen ye-PSA ifumana i-1-8bar, okanye i-150bar ene-nitrogen compressor eyongeziweyo.

• Yintoni enokufezwa sisityalo se-oxygen ne-nitrogen?

Uluhlu lwe-O2: 90% -99.9%.
Uluhlu lwe-N2: 95%-99.9999%

• Ngaba ukuhamba kunye nobunyulu bunokutshintshwa?

Ewe iyafumaneka. Ngokuchukumisa isikrini zonke iiparameter ziyalawulwa.

• Ingaba kuyingozi ukugcwalisa iibhotile zeoksijini ezinoxinzelelo oluphezulu?

Ukulandela incwadi yemiyalelo kunye nesaziso sokwenza umsebenzi kukhuselekile. Kunqabile kakhulu ukuba kubekho ukuqhuma xa kuzaliswa iisilinda, ngaphandle kokuba kwenziwe imisebenzi engalunganga okanye umgangatho ophantsi weendawo ezinoxinzelelo oluphezulu.

• Ngaba imigangatho yethu yokuvelisa izinto ingalandelwa?

Ifumaneka ngokubanzi. Singayila kwaye sivelise ngokomthetho okanye umgaqo welizwe lakho, njengemigangatho yase-US i-ASME, imigangatho ye-CE i-PED njl.

• Ngaba inkqubo ingajongwa kwaye ilawulwe yiPC kunye nefowuni ephathwayo?

Ewe iyafumaneka. Ukubeka esweni ngokupheleleyo iiparameter zokusebenza ezifana nokuhamba, ubumsulwa kunye nee-alamu/izikhumbuzo zisezandleni zethu. Sinokubeka esweni ilifu ukuze sisebenzise iteknoloji yelifu kwinkqubo.

• Ngaba iinkonzo ezikhoyo ziyafumaneka?

Ewe kunjalo. Iinjineli zingathunyelwa kwindawo yabathengi ukuze zifakelwe, ziqaliswe, ziqaliswe, ziqeqeshwe. Intlawulo yenkonzo yi-USD150/ngosuku ngaphandle kweendleko zokuhamba.

• Kuthatha ixesha elingakanani ukugqiba ukufakwa?

Iindidi ezahlukeneyo zinexesha elahlukileyo. Iyunithi ye-PSA idla ngokuthatha iintsuku ezi-3-7 ukugqiba ukufakwa, ukuqalisa, ukugunyazisa, noqeqesho.
Iyunithi ye-Cryogenic ithatha ixesha elide, ngokubanzi inyanga.
Ikwanxulumene neemeko zokulungiselela indawo kunye nobuchule babasebenzi.

• Ingakanani ixesha lakho lokuhlawula elamkelekileyo?

Intlawulo yokuqala ye-20-30%, ibhalansi eyenziwe ngaphambi okanye emva kokuthunyelwa okanye nge-L/C engenakuguqulwa.